Waldorf Streichfett Service Manual download pdf (Page 11)

11 Streichfett Reference Manual

that, the Streichfett is automatically available as a

MIDI device and will also receive power via the

USB connection.

6. Without a computer, you need to connect the

USB power supply that came with the Streichfett

to the USB port 3. After that, the Streichfett is

ready for work!

7. Then switch on the computer (if connected), the

mixing console and finally the amplifier or active

monitor speakers.

w If you do not choose to connect a mixing console,

you can patch the Streichfett’s output signals di-

rectly to an amplifier or an audio interface. Use an

input usually called Line, Aux or Tape input.

m Before connecting and disconnecting the Streichfett

from a power supply source, turn your amplifier’s

volume control all the way down to avoid damage

due to on / off switching noise. The Streichfett pro-

duces a high level output signal. Please take care

that the connected playback device is suitable for

the high level of an electronic instrument. Never

use the mic or phono input of the connected amp!

The USB Connection

Using a USB cable you can connect the Streichfett to your

computer observing the following system requirements:

• Windows PC: Windows XP or newer is recommen-

ded, a USB port

• Linux PC, a USB port

• Apple: Intel Mac with Mac OS X 10.6 or newer, a

USB port

The USB connection of the Streichfett allows:

• Power supply via USB when connected to a suitable

computer

• Power supply via the USB power supply

• Transmitting and receiving MIDI data

• Dumping of firmware updates to the Streichfett

• Data exchange with suitable computer software or

another Streichfett

w Make sure to use a fullspeed USB port on your

computer as well as a USB compatible cable to

avoid problems with data transmission.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

No comments

Waldorf Streichfett Service Manual Page 11