Waldorf RN8810GEC Specifications

Installation and Operation Manual RN8510GE/GEC RN8610GE/GEC RN8810GE/GEC Gas Range Electric Static/Convection Ovens Date Purchased Serial Number Deal

8 Cook Top Options RN8610GE / GEC Cook Top Options RN8613GE / GEC Cook Top Options RN8616GE / GEC Cook Top Options RN8619GE / GEC Cook Top Options RN8

9 Installation Requirements NOTE: • It is most important that this appliance is installed correctly and that operation is correct before use. Instal

10 Clearances NOTE: Only non-combustible materials can be used in close proximity to this appliance. * Side clearances can be 50mm when the adjacent

11 Gas Connection NOTE: ALL GAS FITTING MUST ONLY BE CARRIED OUT BY A QUALIFIED SERVICE PERSON. 1. It is essential that the gas supply is correct f

12 Electrical Connection NOTE: ALL ELECTRICAL CONNECTIONS MUST ONLY BE CARRIED OUT BY A QUALIFIED PERSON. Each appliance should be connected to an

13 Commissioning 1. Before leaving the new installation; a. Check the following functions in accordance with the operating instructions specified in

14 Operation Guide 1. Waldorf appliances have been designed to provide simplicity of operation and 100% safety protection. 2. Improper operation is

15 Open Burners NOTE: Only cooking pans from size Ø 150mm to Ø 420mm are suitable fo use on these open burners. Flame Failure Option (F-Models) Ligh

16 Operation Griddle These griddles are fitted with a pilot as a standard option and Flame Failure Protection, which is incorporated by way of a therm

17 Operation Ovens DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s). NEVER block or cover the openings on each side of the

The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in writing by the ma

18 General Clean the range regularly. A clean range looks better, will last longer and will perform better. Carbonised grease on the surface or betw

19 Cleaning and Maintenance Daily Cleaning 1. The grease tray(s) should be checked and emptied frequently to prevent overflow and spillage. Remove

20 Cleaning and Maintenance Fig 5 Burner Base Trivets and Burners a. Remove the trivets from the top of the appliance, taking note that the trivets a

21 Cleaning and Maintenance NOTE: It is imperative that the trivet supports are correctly re-fitted to the unit to ensure that the trivets locate co

22 Fault Finding This section provides an easy reference guide to the more common problems that may occur during the operation of your appliance. The

23 Fault Finding Fault Possible Cause Remedy Element does not work when turned ‘ON’. Check individual fuses located behind the control panel. Chec

24 Wiring Schematic RN8510GE RN8610GE RN8810GE

25 Wiring Schematic Wiring Diagram for RN8510GE RN8610GE RN8810GE

26 Wiring Schematic RN8510GEC RN8610GEC RN8810GEC

27 Wiring Schematic Wiring Diagram RN8510GEC RN8610GEC RN8810GEC

1 Waldorf Gas Range Electric Static/Convection Ovens RN8510GE Gas Range Electric Static Oven Four Open Burner. RN8610GE Gas Range Electric Static

28 Conversion Procedure NOTE: • These conversions should only be carried out by qualified persons. All connections must be checked for leaks before

29 Gas Conversion and Specifications 12. Refit all the trivet supports to the top of the appliance. Note the orientation of the trivet support when

30 Gas Conversion and Specifications Pilot Injectors a. Unscrew and remove the Pilot Injector Plug from the fitting at the end of the pilot injector

31 Gas Conversion and Specifications Griddle Pilot Burner a. With the gas supply turned off at the main supply, remove the griddle plate section by l

32 Gas Regulator NOTE: The regulator supplied is convertible between Natural Gas and LPG, but it’s outlet pressure is fixed ex-factory and is NOT to

33 Gas Specifications - Australia / New Zealand Only - UK Only Appliance Classification Category: II2H3P. Flue Type: A1. * The burner opera

34 Replacement Parts List When ordering replacement parts, please quote the part number and the description as listed below. If the part required is

35 Oven 228691 Oven Top Element 1.75kW. (750 Ovens). 228690 Oven Bottom Element 3.75kW. (750 Ovens). 228082 Oven Top Element 2kW. (900 - 12

36

37

2 Introduction We are confident that you will be delighted with your WALDORF GAS RANGE ELECTRICAL STATIC / CONVECTION OVEN and it will become a most

3 Specifications Model Numbers Covered in this Specification RN8510GE 4 Open Burners + Electric Static Oven. RN8513GE 2 Open Burners + 300mm Gri

4 Specifications Gas Supply Requirements - Australia / New Zealand - UK Only Appliance Classification Category: II2H3P. Flue Type: A1. * The

5 Electrical Supply Requirements Electrical Connection RN8510 / RN8610GE / GEC Models Only. Electrical supply connection point is located at the

6 Dimensions Dimensions RN8510GE / GEC Refer to Page 8 for Cook Top Options Dimensions RN8610GE / GEC

7 Dimensions Refer to Page 8 for Cook Top Options Dimensions RN8810GE / GEC